*********************
|tool_image47| Ruffle
*********************

  Allow users to create ruffle piece, or develop an exisiting piece into a ruffle.  


Draw piece of ruffle hem
=========================

  #. Select |tool_image47| Ruffle Tool; 
  
  #. Left-click on the desired location; 
  
  #. Dialog box appears, enter values into it, click [OK].  
   
        |tool_image48|
		
Draw piece of A-line skirt
==========================

  Repeat the steps as above.  
  
      |tool_image102|

.. note::  
  **Internal Segment** : draw it as internal contour of the piece, each segment can be removed individually.  
		 
  **Draw in Piece View** : draw it as a pattern piece directly.  
		
Develop an existing piece into a ruffle
========================================

  New in V7.0:
		
  #. Activate the piece and select the upper segment; 

  #. Select |tool_image47| Ruffle tool; 

  #. Right-click anywhere you wish; 

  #. Hold down the **Ctrl** key (Windows) or **Command** key (Macintosh) and select the under segment; 

  #. Right-click anywhere you wish; 

  #. Left-click the fixed point, and input the values or drag the slider to modify the ruffle.  
   
       |tool_image49|

.. note:: It also previews the motion when the values are being changed.  

.. |tool_image47| image:: _static/tool_image47.png
.. |tool_image48| image:: _static/tool_image48.png
.. |tool_image49| image:: _static/tool_image49.png
.. |tool_image102| image:: _static/tool_image102.png