**********************
|tool_image56| Segment
**********************

  Allow users to draw a segment on any position of the working area, or on the desired piece.  
  
Draw a segment on working area
===============================

  #. Select |tool_image56| tool; 
  
  #. Click the start point without releasing the mouse button, move it to desired position and release; or click the start point, move it to desired position, and click once more.  
  
      |tool_image57|

Draw a segment on desired piece
================================

  #. Activate piece; 

  #. Select |tool_image56| tool; 
  
  #. Click on the desired position (like the start point in the image), move the pointer to desired position (like the end point in the image), click to finish drawing.  
  
     |tool_image58|
	 
Enter values to draw segment
=============================
	  
  #. Select |tool_image56| tool; 
	
  #. Hold down **Alt** (Windows) or **Option** (Macintosh) or **Alt+Windows** (Linux) key, click the point where you want your segment to start (if the segment has to be grouped or attached to a piece, the piece must be activated prior drawing the segment); 

  #. Enter the value in the dialog box, click [OK] button.  
  
        |tool_image59|
		
	.. note:: New in V7.0: It preview the result.  
	
.. |tool_image56| image:: _static/tool_image56.png
.. |tool_image57| image:: _static/tool_image57.png
.. |tool_image58| image:: _static/tool_image58.png
.. |tool_image59| image:: _static/tool_image59.png