*******************
|tool_image16| Text
*******************

  Allow users to write notes on the selected piece or on the working area.  While this information remains independent, you can group it with a Pattern Piece.  
  
Customize letter size
======================

  New in V7.0: 
  
  In addition to select the letter size by pulling down the menu, users can also input the size as wish: 

      |tool_image101|

  
Input new text on working area
===============================

  #. Select |tool_image16| tool; 
  
  #. Click the desired position on the working area; 
  
  #. Enter words, select or enter letter size, click [OK] button.  
  
     |tool_image17|
	 
.. note:: Click the small “T” and hold your click to read the text.  
	 
Create new text on the piece
=============================

  #. Activate the desired piece; 
  
  #. Select |tool_image16| tool; 
  
  #. Click the desired position on the piece (e.g., on the segment), enter text and select or enter size.  
     
      |tool_image18|

Create new text aligned along segment
========================================

  #. Select the desired segment; 
  
  #. Select |tool_image16| tool; 
  
  #. Click any start point of the segment, enter desired words, remember to select [Align Text Along Segment] option, then select or enter desired size, click [OK] button.  
  
        |tool_image19|

        |tool_image21|
		
.. note:: 

     To see the content of the Text, you must check the text item under the menu [View] - [Show] - [Text].  
	 
	  |tool_image20|
	  
Modify the text
======================

  #. Select the text reference point next to the text icon; 
  
  #. Select menu [Treatment] - [Item Info…]; 
  
  #. The [Text info] dialog box appears, change the information, then click [OK] button.  
  
       |tool_image22|
	   
.. |tool_image16| image:: _static/tool_image16.png
.. |tool_image17| image:: _static/tool_image17.png
.. |tool_image18| image:: _static/tool_image18.png
.. |tool_image19| image:: _static/tool_image19.png
.. |tool_image20| image:: _static/tool_image20.png
.. |tool_image21| image:: _static/tool_image21.png
.. |tool_image22| image:: _static/tool_image22.png
.. |tool_image101| image:: _static/tool_image101.png