********************************************
Chapter 4 - Digitizer Manager Image Capture
********************************************

  Allow users to capture the images of the paper patterns and save them in the computer.  
  
Supported Camera And System Requirement
=======================================

  #. Support Canon EOS Series
  
     |capture_image22|
	 
  #. The shooting distance need to be more than 110cm.  
  
     |capture_image13|
 
  #. System requirement and recommended hardware specification.  
  
     |image003|

  #. Accept V notches tailoring on the pattern (Not accept other painting notches and inner line on the pattern).  

  #. Can not read multiple patterns drawing in single paper. 
  

Setup The Camera
=================
    
How to setup the camera
-----------------------
  
  #. Set the power switch to [ON] and set the Mode Dial to |capture_image9| (Scene Intelligent Auto)
     
	 |capture_image10|
	 
  #. Connecting the camera to the PC
  
     |capture_image11|
 
  #. The camera is connected to PC successfully when this window pops up
  
     |capture_image12| 
	 
  #. Keep your camera and pattern paper parallel, with a distance more than 110 cm.  
  
     |capture_image13|
	
  
  
Capture Image
===============

How to capture image by using Digitizer Manager
-----------------------------------------------

  #. Open Digitizer Manager, click menu [Options] - [Calibration].  
  
      |capture_image14|

  #. Enter original position in X, Y and click calibration.  
  
     a. Pattern Paper must be placed inside the frame from camera preview
	 
     b. Keep pattern X, Y axis parallel to the X, Y axis in camera preview. 
	 
      |capture_image15|

  #. Calibration Completed -> OK.  
  
     |capture_image16|
	 
  #. Click menu [File] - [Take Picture]
  
     |capture_image17|

  #. Lay a white paper on checker board paper, put patterns on the paper.  Click [OK].  Check patterns in your job list.  
  
     |capture_image18|
	 
  #. Open Pattern Design Application, click menu [File] - [Open Digitizer...].  
  
     |capture_image19|
	 
  #. Select the "Job List" you want, click [OK] button.  
  
     |capture_image20|  
	 
  #. Now you can design your patterns in Pattern Design. 
  
     |capture_image21|
  
.. |capture_image1| image:: _static/image_capture/capture_image1.png 
.. |capture_image2| image:: _static/image_capture/capture_image2.png 
.. |capture_image3| image:: _static/image_capture/capture_image3.png
.. |capture_image4| image:: _static/image_capture/capture_image4.png 
.. |capture_image5| image:: _static/image_capture/capture_image5.png 
.. |capture_image6| image:: _static/image_capture/capture_image6.png 
.. |capture_image7| image:: _static/image_capture/capture_image7.png 
.. |capture_image8| image:: _static/image_capture/capture_image8.png 
.. |capture_image9| image:: _static/image_capture/capture_image9.png 
.. |capture_image10| image:: _static/image_capture/capture_image10.png 
.. |capture_image11| image:: _static/image_capture/capture_image11.png 
.. |capture_image12| image:: _static/image_capture/capture_image12.png 
.. |capture_image13| image:: _static/image_capture/capture_image13.png 
.. |capture_image14| image:: _static/image_capture/capture_image14.png 
.. |capture_image15| image:: _static/image_capture/capture_image15.png 
.. |capture_image16| image:: _static/image_capture/capture_image16.png 
.. |capture_image17| image:: _static/image_capture/capture_image17.png 
.. |capture_image18| image:: _static/image_capture/capture_image18.png 
.. |capture_image19| image:: _static/image_capture/capture_image19.png 
.. |capture_image20| image:: _static/image_capture/capture_image20.png
.. |capture_image21| image:: _static/image_capture/capture_image21.png 
.. |capture_image22| image:: _static/image_capture/capture_image22.png 
.. |image003| image:: _static/image_capture/image003.png